Finline-integrated cold electron bolometer
Övrigt konferensbidrag, 2010

The Cold-Electron Bolometer (CEB) is a sensitive millimetre-wave detector which is easy to integrate with superconducting planar circuits. CEB detectors have other important features such as high saturation power and very fast response. We have fabricated and tested CEB detectors integrated across the slot of a unilateral finline on a silicon substrate. Bolometers were fabricated using two fabrication methods: e-beam direct-write trilayer technology and an advanced shadow mask evaporation technique. The CEB performance was tested in a He3 sorption cryostat at a bath temperature of 280mK. DC I-V curves and temperature responses were measured in a current bias mode, and preliminary measurements of the optical response were made using an IMPATT diode operating at 110GHz. These tests were conducted by coupling power directly into the finline chip, without the use of waveguide or feedhorns. For the devices fabricated in standard direct-write technology, the bolometer dark electrical noise equivalent power is estimated to be about 5×10-16W/ √Hz, while the dark NEP value for the shadow mask evaporation technique devices is estimated to be as low as 3×10-17W/√Hz.

Författare

Ernst Otto

University of Oxford

Mikhail Tarasov

Chalmers, Mikroteknologi och nanovetenskap, Kvantkomponentfysik

P. K. Grimes

University of Oxford

Natalia Kaurova

Chalmers, Mikroteknologi och nanovetenskap, Kvantkomponentfysik

Hannes Kuusisto

Chalmers, Mikroteknologi och nanovetenskap

Leonid Kuzmin

Chalmers, Mikroteknologi och nanovetenskap, Kvantkomponentfysik

G. Yassin

University of Oxford

Proceedings of SPIE - The International Society for Optical Engineering

0277786X (ISSN) 1996756X (eISSN)

Vol. 7741 77411A
978-081948231-0 (ISBN)

Ämneskategorier

Fysik

DOI

10.1117/12.858263

ISBN

978-081948231-0

Mer information

Senast uppdaterat

2018-03-19