Heat Transfer Prediction of In-Service Welding in a Forced Flow of Fluid
Artikel i vetenskaplig tidskrift, 2009

An algorithm for heat transfer prediction of in-service welding operations in a forced flow of fluid is presented. The algorithm presented is derived from Rosenthal's 3D heat flow equation and boundary layer approximations. This was possible by the introduction of an apparent thermal conductivity k(PL), which is a function of the boundary layer's heat transfer coefficient alpha(f) and the base material's thickness delta. This implies that a weld cooling time Delta tT(1)/T-2 in a forced flow of fluid can now be calculated by an ordinary engineering calculator and thus enabling suitable welding parameters to be determined. The magnitude of k(PL)(alpha(f),delta) was established by regression analysis of results from a parametric finite element analysis series of a total number of 112 numerical simulations. Furthermore, the result of the regression analysis was validated and verified by a welding experiment series accomplished on an in-house designed and constructed in-service welding rig. The principle design of the welding rig as well as its instrumentation, a PC based Data Acquisition system, is described. In addition, a method to measure the weld metals cooling time Delta tT(1)/T-2 by means of thermocouple elements is described. Finally, the algorithm presented in this study proved feasible for industrial in-service welding operations of fine-grained Carbon and Carbon-Manganese steels with a maximum Carbon Equivalent (IIW) (CE) of 0.32.

flow

welds

welding

numerical analysis

heat transfer

regression analysis

Författare

Per Lindström

Chalmers, Sjöfart och marin teknik

Journal of Offshore Mechanics and Arctic Engineering

0892-7219 (ISSN) 1528-896X (eISSN)

Vol. 131 3 1-6

Ämneskategorier

Maskinteknik

DOI

10.1115/1.3124126

Mer information

Skapat

2017-10-06