Effect of corrosion on bond in reinforced concrete under cyclic loading
Artikel i vetenskaplig tidskrift, 2006

Cyclic loading can result in severe deterioration in the bond between reinforcing steel bar and the surrounding concrete, especially when the reinforcement is corroded. In this study, tests were carried out for bond stress-slip response of corroded reinforcement with concrete under cyclic loading. Parameters investigated include: corrosion level, confinement, bar type, and loading history. The results revealed that bond behaviour was significantly reduced under cyclic loading. Degradation in bond was significantly less for deformed bars than for smooth bars at the initial loading cycle, but the difference was diminished with loading. The bond reduction was more substantial for unconfined steel bars than for confined bars. The relatively high level of corrosion caused degradation primarily in the initial five cycles, the effect of corrosion being decreased with loading. It was also demonstrated that the cyclic bond stress-slip curves depended on loading history.

reinforcement

corrosion

concrete

cyclic loading

bond strength

Författare

Congqi Fang

Chalmers

Shanghai Jiao Tong University

Kent Gylltoft

Chalmers, Bygg- och miljöteknik, Konstruktionsteknik

Karin Lundgren

Chalmers, Bygg- och miljöteknik, Konstruktionsteknik

Mario Plos

Chalmers, Bygg- och miljöteknik, Konstruktionsteknik

Cement and Concrete Research

0008-8846 (ISSN)

Vol. 36 3 548-555

Ämneskategorier

Samhällsbyggnadsteknik

DOI

10.1016/j.cemconres.2005.11.019

Mer information

Senast uppdaterat

2018-09-10