Measurements of a single pulse impinging jet. A CFD reference
Paper i proceeding, 2014

This paper reports three sets of measurements of a single pulse impinging jet. The purpose is to serve as a reference for CFD validation. A gas injector generates a single pulse jet at Re ~90000. The jet impinges on a temperature controlled flat target at different angles (0̈, 30̈, 45̈ and 60̈). The jet velocity field is measured with PIV. The evolution of the jet velocity profile in time is reported at two different locations (suitable as CFD inlet conditions). At the same locations also turbulence quantities are reported. The impingement wall temperature is measured with fast responding thermocouples and infrared camera. These give high time and space resolution respectively. Results are reported in a format suitable for comparison with CFD simulations. The results show that the heat transfer effects are highest for the jet impinging normally on the target. Target inclination has remarkable effects on the jet penetration rate and repeatability. Even small target inclinations result creates a preferential direction for the jet flow and cause a shift in the position of the stagnation region.

Författare

Mirko Bovo

Chalmers, Tillämpad mekanik, Förbränning och framdrivningssystem

Borja Rojo

Chalmers, Tillämpad mekanik, Strömningslära

Maxim Golubev

Chalmers, Tillämpad mekanik, Strömningslära

EPJ Web of Conferences

21016275 (ISSN) 2100014X (eISSN)

Vol. 67 02010
9788026053750 (ISBN)

Ämneskategorier

Strömningsmekanik och akustik

DOI

10.1051/epjconf/20146702010

ISBN

9788026053750

Mer information

Skapat

2017-10-08