Ash deposition on heat transfer tubes during combustion of demolition wood
Artikel i vetenskaplig tidskrift, 2006

Wood from old buildings, demolition wood, has a considerable energy value and can be used as a fuel. However, the material contains impurities that may have harmful effects. This investigation, carried out in a fluidized-bed boiler, focuses on the formation of deposits on heat transfer surfaces during combustion of demolition wood. To avoid inhomogeneity and variations in composition of the fuel during the tests, highquality wood was used and two substances that are suspected to contribute most to deposits, chlorine and zinc (from paint), were added in predetermined quantities. It was found that chlorine was the most harmful constituent, promoting deposits in the form of potassium chloride and also zinc chloride. The deposits from wood combustion or from wood contaminated with zinc are deemed not to be excessively harmful with respect to corrosion as long as the chlorine concentration is low and oxidizing conditions prevail.

Författare

Lars-Erik Åmand

Chalmers, Energi och miljö, Energiteknik

Bo G Leckner

Chalmers, Energi och miljö, Energiteknik

David Eskilsson

SP Sveriges Tekniska Forskningsinstitut AB

Claes Tullin

SP Sveriges Tekniska Forskningsinstitut AB

Energy & Fuels

0887-0624 (ISSN) 1520-5029 (eISSN)

Vol. 20 3 1001-1007

Ämneskategorier

Annan naturresursteknik

DOI

10.1021/ef0503919

Mer information

Senast uppdaterat

2018-09-06