Investigation of Roller Pressure and Shear Stress in the HPGR Using DEM
Paper i proceeding, 2016

HPGRs have since introduced in the 1980s (Kellerwessel, 1993; Schönert, 1988), now become integral comminution units at several minerals processing plants around the world. Even though a lot of the initial issues concerning performance, availability and wear have been addressed and solved there are still phenomena and aspects which can be improved and understood further. Schönert and Sander (2002) presented experimental results and a mechanistic model including the internal force dynamics between the rollers and the compacted bed. They derived expressions for the pressure distribution involving most of the influencing terms and effects. However, in order to solve the differential equations several of the terms vanish by assumptions. The Schönert and Sander model reflects the experimental data in many aspects but the predicted shear force distinctly deviates from the experimental results at the angular position of the peak pressure level. This finding suggests that the particle to particle interaction and breakage process in the different zones seen in Figure 1 are complex and difficult to model using analytical models. A numerical modelling approach using DEM does not require the same amount of assumptions and simplifications of boundary conditions. Hence such modelling may provide further knowledge and vital understanding. In this paper the breakage process is simulated in order to investigate the shear slip behaviour and how it relates to different operating variables. A laboratory scale HPGR corresponding to the experimental setup used by Schönert (2002) have been modelled in EDEM (DEM-Solutions). The bonded particle model (BPM) is used for modelling quartz particles (Potyondy, 2004). The breakage model strength parameters are calibrated against interparticle breakage experiments in an Instron 400RD compression device. The contact model parameters are calibrated using calibration methods developed by Quist (2015). The floating roller dynamics are modelled using a spring-damper system. Results present insights regarding the interparticle slip behaviour as well as the frictional tangential force distribution on the rollers. The simulated roller pressure distribution shows good correspondence with previously reported findings in the literature.

HPGR

Simulation

Comminution

DEM

Crushing

Breakage

Författare

Johannes Quist

Chalmers, Produkt- och produktionsutveckling, Produktutveckling

Magnus Evertsson

Chalmers, Produkt- och produktionsutveckling, Produktutveckling

XXVIII International Mineral Processing Congress Proceedings

Vol. 2016-September Canadian Institute of Mining, Metallurgy and Petro
978-1-926872-29-2 (ISBN)

Ämneskategorier

Mineral- och gruvteknik

Maskinteknik

Beräkningsmatematik

Naturresursteknik

Drivkrafter

Hållbar utveckling

Styrkeområden

Produktion

Mer information

Senast uppdaterat

2024-07-12