Simulation and Optimization of Recirculating Aquaculture Systems
Water treatment in recirculating aquaculture systems (RAS) typically consist of particle removal (settling and/or filtering), degassing of carbon dioxide, biological removal of organics and nitrogenous waste, oxygenation of water and (optionally) application of ozone or UV against pathogens. Dimensioning the various units is often done using steady state mass balances that do not capture the complex interactions present in biological water treatment systems. Simulations of integrated dynamical models of fish growth, waste production and water treatment have previously been shown to be useful in exploring these interactions, and with enough fidelity, computer models can greatly improve the speed at which recirculating aquaculture can be developed.
In this thesis, a framework for dynamical modelling of recirculating aquaculture systems is presented. It is based on the well-established Activated Sludge Model no. 1 together with models of fish growth, feeding, digestion and evacuation. The model has been implemented in Modelica to produce a dynamic RAS simulator that is the successor to FishSim, with greatly improved performance and robustness. A genetic optimization routine was used with the simulator in order to investigate the impact of different layouts, or topologies, on the performance of the water treatment in a RAS.
Three different water treatment topologies, two fish species (Rainbow trout and Atlantic salmon), two influent oxygen saturation levels and both semi-closed and fully recirculating versions were compared, for a total of 24 cases. Each case was optimized in terms of required biofilter volume to maintain an acceptable total ammonia nitrogen (TAN) concentration in the fish tank. The results indicate that the smallest volume is obtained by introducing several bypass flows in the treatment system of a semi-closed RAS. In a fully closed system with minimal water exchange, denitrification is required to prevent excessive accumulation of nitrate, and then the flows of oxygen, carbon and nitrogen must be carefully considered. For several of the cases, no optimum with denitrification could be found.
We conclude that no overall best configuration and operation strategy for water treatment could be found, but rather that it varies depending on the conditions imposed by the fish culture. This highlights how simulations can be an important tool in gaining understanding about the behaviour of recirculating aquaculture systems.
Chalmers, Elektroteknik, System- och reglerteknik, Reglerteknik
Pedersen, S., Wik, T. A comparison of topologies in recirculating aquaculture systems using simulation and optimization
Innovativa lösningar för utveckling av marint vattenbruk med hög kvalitet i Sverige (NOMACULTURE)
Stiftelsen för miljöstrategisk forskning (Mistra), 2014-06-01 -- 2018-08-31.
Oceanografi, hydrologi, vattenresurser
EC, Hörsalsvägen 11
Opponent: Professor Bengt Carlsson, Department of Information Technology, Uppsala University, Sweden