Oxidation behaviour of HVAF-sprayed NiCr coating in moisture-laden environment
Paper i proceeding, 2017

© Copyright 2017 by DVS Media GmbH. All rights reserved. Reducing CO 2 emissions from power generation plants is intimately related to enhancing their thermal efficiency, which can be achieved by increasing the temperature/pressure of steam. However, any increase in steam temperature is inevitably accompanied by accelerated oxidation of boiler components. The use of renewable fuels such as biomass increases the problem by introducing a number of corrosive compounds into the boiler environment, resulting in more rapid degradation of components. Although thermal sprayed coatings are techno-commercially attractive solutions for augmenting the durability of degradation-prone boiler components and are already used, further improvements in their performance are continuously sought. High-velocity air fuel (HVAF) coatings are promising in this context. In the present work, isothermal oxidation behavior of a candidate HVAF-sprayed Ni21Cr was studied in N 2 + 5% O 2 + 20% H 2 O at 600°C for 168h. The oxide scale growth mechanisms were studied by BIB/SEM/EDX to evaluate the effectiveness of the coatings. It was found that the water vapor effect is insignificant due to the Cr reservoir in the Ni21Cr coating, which yielded enhanced oxidation protection by forming nano-scale Cr 2 O 3 .

Författare

E. Sadeahimeresht

Högskolan Väst

Johan Eklund

Chalmers, Kemi och kemiteknik, Energi och material

Julien Phother Simon

Chalmers, Kemi och kemiteknik, Energi och material

J. Lyske

N. Markocsan

Högskolan Väst

S. Joshi

Högskolan Väst

Proceedings of the International Thermal Spray Conference

Vol. 2 644-646

International Thermal Spray Conference and Exposition, ITSC 2017
Dusseldorf, Germany,

Ämneskategorier

Energiteknik

Bearbetnings-, yt- och fogningsteknik

Korrosionsteknik

Infrastruktur

Chalmers materialanalyslaboratorium

Styrkeområden

Materialvetenskap

Mer information

Senast uppdaterat

2021-05-11