Variable High Precision Wide D-Band Phase Shifter
Artikel i vetenskaplig tidskrift, 2020

This paper proposes a new concept of designing compact high precision millimeter-wave wideband variable phase shifters. The phase shifter is implemented with a stacked shim with extremely short length of 0.9 mm and two waveguide flange adaptors with length of 0.5 mm. High precision phase shifting is achieved over entire D-band (110-170 GHz) by rotating the shim 90 degrees from aligned to perpendicular with consistent impedance matching performance. In addition, a glide-symmetric holey electromagnetic bandgap (EBG) structure is adopted to avoid wave leakage from the gap between the shim and the flange adaptors. A proof-of-concept (PoC) demonstrator is designed, manufactured, and tested. The measured results show that the designed stacked shim phase shifter with embedded EBG structure ensures return loss higher than 10 dB across 110-170 GHz with a 75 mu m airgap between waveguide flanges. The studied phase shifter provides a 0.88ffi phase shifting with each degree of mechanical rotation. The fabricated PoC phase shifter has a worst-case insertion loss of 0.92 dB and a return loss of 20 dB across the entire 110-170 GHz band and a maximum phase shift of 30 degrees. At 10 degrees phase shifting, the measured insertion loss is lower than 0.52 dB, and return loss is higher than 23 dB, respectively.

phase shifter



electromagnetic bandgap (EBG)



Zhongxia Simon He

Senwellen Shenzhen Communications Technologies Company Ltd.

Chalmers, Mikroteknologi och nanovetenskap, Mikrovågselektronik

Sining An

Chalmers, Mikroteknologi och nanovetenskap, Mikrovågselektronik

Jinlin Liu

Southeast University

Cheng Jin

Beijing Institute of Technology

IEEE Access

2169-3536 (ISSN) 21693536 (eISSN)

Vol. 8 140438-140444 9151129


Rymd- och flygteknik

Annan fysik

Annan elektroteknik och elektronik



Mer information

Senast uppdaterat