Numerical comparison between the Dynamic Mode Decomposition and the Arnoldi extraction technique on an afterburner test case
Paper i proceeding, 2012

The fairly recent methodology, the so called Dynamic Mode Decomposition, is investigated for the Afterburner test case in order to see if the methodology is able to capture thermo-acoustic instabilities. Previous papers deal with the prediction of such instabilities using the Arnoldi extraction technique. The present paper compares these two approaches in order to see their advantages and drawbacks regarding the present case of study. The linearized solver chosen in the Arnoldi extraction technique is based on the Linearized Navier Stokes Equations (LNSE). As a main concern of the study, the structures and frequencies of the buzz (~ 120 Hz) and the screech modes (~ 1200 Hz) are compared using both methodologies. Additional cases are also studied acoustic liner walls in computational domain and tuned to damp the Screech mode. In these cased the methodologies are tested for their ability to predict the damping effect of the liner. © 2012 by Guillaume Jourdain Lars-Erik Eriksson. Published by the American Institute of Aeronautics and Astronautics, Inc.

Författare

Guillaume Jourdain

Chalmers, Tillämpad mekanik, Strömningslära

Lars-Erik Eriksson

Chalmers, Tillämpad mekanik, Strömningslära

18th AIAA/CEAS Aeroacoustics Conference (33rd AIAA Aeroacoustics Conference)


9781600869327 (ISBN)

18th AIAA/CEAS Aeroacoustics Conference 2012 (33rd AIAA Aeroacoustics Conference)
Colorado Springs, CO, USA,

Ämneskategorier

Teknisk mekanik

Farkostteknik

Strömningsmekanik och akustik

DOI

10.2514/6.2012-2147

Mer information

Senast uppdaterat

2022-01-25