Mikael Rosenqvist

at

Mikael Rosenqvist is an industrial PhD student who has worked in the automotive industry since 2001. He leads a project linking geometry assurance with production ergonomics. The aim is to develop a decision support for development of production strategies and manufacturing engineering in early phases. This enables analysis of consequences and calculation of costs related to defects in geometric and production ergonomic quality. By minimizing late quality improvement measures, industry can reduce both their environmental impact and their costs and improve the working environment for operators.

Source: chalmers.se

Projects

2013–2016

Proactive assembly ergonomical and geometrical quality assurance for sustainable production (PEGASUS)

Nina Silow Department of Product and Production Development
Ann-Christine Falck Department of Product and Production Development, Production Systems
Mikael Rosenqvist Department of Product and Production Development, Product Development
Rikard Söderberg Department of Product and Production Development
Kristina Wärmefjord Department of Product and Production Development, Product Development
VINNOVA

There might be more projects where Mikael Rosenqvist participates, but you have to be logged in as a Chalmers employee to see them.

Publications

2016

Proactive assessment of basic complexity in manual assembly: development of a tool to predict and control operator-induced quality errors

Ann-Christine Falck, Roland Örtengren, Mikael Rosenqvist et al
International Journal of Production Research. Vol. 2016, p. 13
Scientific journal article - peer reviewed
2016

Including measures of assembly complexity in proactive geometry assurance, a case study.

Mikael Rosenqvist, Ann-Christine Falck, Rikard Söderberg et al
Procedia CIRP. 6th CIRP Conference on Assembly Technologies and Systems, CATS 2016; Gothenburg; Sweden; 16-18 May 2016. Vol. 44, p. 151-156
Conference paper - peer reviewed
2016

Variation Analysis considering manual assembly complexity in a CAT tool.

Mikael Rosenqvist, Ann-Christine Falck, Lars Lindkvist et al
14th CIRP Conference on Computer Aided Tolerancing, CAT 2016; Gothenburg; Sweden; 18 May 2016 through 20 May 2016. Vol. 43, p. 94-99
Conference paper - peer reviewed
2016

Criteria for assessment of basic assembly complexity

Ann-Christine Falck, Roland Örtengren, Mikael Rosenqvist et al
Procedia CIRP. 6th CIRP Conference on Assembly Technologies and Systems, CATS 2016; Gothenburg; Sweden; 16 May 2016 through 18 May 2016. Vol. 44, p. 424-428
Conference paper - peer reviewed
2015

Challenges Moving from Physical into Virtual Verification of Sheet Metal Assemblies

Björn Lindau, Mikael Rosenqvist, Lars Lindkvist et al
Proceedings - ASME 2015 International Mechanical Engineering Congress and Exposition, IMECE 2015, Houston, United States, 13-19 November 2015
Conference paper - peer reviewed
2015

Working procedure for early proactive geometry assurance considering manual assembly complexity

Mikael Rosenqvist, Ann-Christine Falck, Rikard Söderberg et al
Proceedings - ASME 2015 International Mechanical Engineering Congress and Exposition, IMECE 2015, Houston, United States, 13-19 November 2015. Vol. 11
Conference paper - peer reviewed
2015

A comparison of two methods for assembly complexity- What are they good for?

Ann-Christine Falck, Lina Andersson, Sandra Mattsson et al
NES, Nordic Ergonomics society, 47th Annual Conference, 02-04 November 2015, Lillehammer, Norway , p. 1-5
Conference paper - peer reviewed
2014

Geometrical robustness analysis considering manual assembly complexity

Mikael Rosenqvist, Ann-Christine Falck, Lars Lindkvist et al
5th CATS 2014 - CIRP Conference on Assembly Systems and Technologies, 20141112-13. Vol. 23 (C), p. 98-103
Conference paper - peer reviewed
2014

Assembly failures and action cost in relation to complexity level and assembly ergonomics in manual assembly (part 2)

Ann-Christine Falck, Roland Örtengren, Mikael Rosenqvist et al
International Journal of Industrial Ergonomics. Vol. 44 (2014), p. 455-459
Scientific journal article - peer reviewed
2014

A model for calculation of the costs of poor assembly ergonomics

Ann-Christine Falck, Mikael Rosenqvist,
International Journal of Industrial Ergonomics. Vol. 44 (2014), p. 140-147
Scientific journal article - peer reviewed
2014

Operator Related Causes for Low Correlation Between Cat Simulations and Physical Results

Mikael Rosenqvist, Ann-Christine Falck, Kristina Wärmefjord et al
Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition. Vol. 12
Conference paper - peer reviewed
2012

A calculation model for ergonomics cost-benefit analyses in early product development stages

Ann-Christine Falck, Mikael Rosenqvist,
AHFE 4th International Conference on Applied Human Factors and Ergonomics, July 22-25, 2012, San Francisco, California, USA, p. 71
Conference paper - peer reviewed
2012

Robust design and geometry assurance considering assembly ergonomics

Mikael Rosenqvist, Ann-Christine Falck, Rikard Söderberg et al
Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012, Nov. 9-15, 2012, Houston, Texas, USA. Vol. 3, p. 97-104
Conference paper - peer reviewed
2012

Geometry assurance versus assembly ergonomics- Comparative interview studies in five manufacturing companies

Mikael Rosenqvist, Ann-Christine Falck, Rikard Söderberg et al
In proceedings of the Cirp Conference On Assembly Technologies And Systems, Ann Arbor, USA, 20-22 maj, 2012
Conference paper - peer reviewed
2012

A calculation model for ergonomics cost-benefit analyses in early product development stages

Ann-Christine Falck, Mikael Rosenqvist,
AHFE 2012: Applied Human Factors and Ergonomics Conference, San Fransisco, California, USA, 21-25 July, 2012 (Conference program, session 185), p. pp. 71
Conference paper - peer reviewed
2012

Relationship between complexity in manual assembly work, ergonomics and assembly quality

Ann-Christine Falck, Roland Örtengren, Mikael Rosenqvist et al
Ergonomics for Sustainability and Growth, NES 2012 (Nordiska Ergonomisällskapet) konferens, Saltsjöbaden, Stockholm, 19-22 augusti, 2012 (Book of abstracts, Abstract B4:2), p. 91
Conference paper - peer reviewed
2012

What are the obstacles and needs of proactive ergonomics measures at early product development stages? - An interview study in five Swedish companies.

Ann-Christine Falck, Mikael Rosenqvist,
International Journal of Industrial Ergonomics. Vol. 42 (5), p. 406-415
Scientific journal article - peer reviewed