In situ tempering of martensite during laser powder bed fusion of Fe-0.45C steel

Journal article, 2022

During laser powder bed fusion (L-PBF), materials experience cyclic re-heating as new layers are deposited, inducing an in situ tempering effect. In this study, the effect of this phenomenon on the tempering of martensite during L-PBF was examined for Fe-0.45C steel. Detailed scanning electron microscopy, transmission electron microscopy, atom probe tomography, and hardness measurements indicated that martensite was initially in a quenched-like state after layer solidification, with carbon atoms segregating to dislocations and to martensite lath boundaries. Subsequent tempering of this quenched-like martensite was the result of two in situ phenomena: (i) micro-tempering within the heat affected zone and (ii) macro-tempering due to heat conduction and subsequent heat accumulation. Hardness measurements showed that although both influenced martensite tempering, micro-tempering had the most significant effect, as it reduced martensite hardness by up to ∼380 HV. This reduction was due to the precipitation of nano-sized Fe3C carbides at the previously carbon-enriched boundaries. Lastly, the magnitude of in situ tempering was found to be related to the energy input, where increasing the volumetric energy density from 60 to 190 J/mm3 reduced martensite hardness by ∼100 HV. These findings outline the stages of martensite tempering during L-PBF and indicate that the level of tempering can be adjusted by tailoring the processing parameters.