ALMA Band 5 (163-211 GHz) Sideband Separation Mixer
Paper in proceedings, 2009

We present the design of ALMA Band 5 sideband separation SIS mixer and experimental results for the double side band mixer and first measurement results 2SB mixer. In this mixer, the LO injection circuitry is integrated on the mixer substrate using a directional coupler, combining microstrip lines with slot-line branches in the ground plane. The isolated port of the LO coupler is terminated by wideband floating elliptical termination. The mixer employs two SIS junctions with junction area of 3 μm2 each, in the twin junction configuration, followed by a quarter wave transformer to match the RF probe. 2SB mixer uses two identical but mirrored chips, whereas each DSB mixer has the same end-piece configuration. The 2S mixer has modular design such that DSB mixers are measured independently and then integrated into 2SB simply by placing around the middle piece. Measurements of the DSB mixer show noise temperature of around 40K over the entire band. 2SB mixer is not fully characterized yet, however, preliminary measurement indicates SSB (un-corrected) noise temperature of 80K.

Millimeter wave receivers

Superconductorinsulator- superconductor mixers

Millimeter wave mixers

Thin film circuits.

Author

Bhushan Billade

Chalmers, Department of Radio and Space Science, Advanced Receiver Development

Victor Belitsky

Chalmers, Department of Radio and Space Science, Advanced Receiver Development

Alexey Pavolotskiy

Chalmers, Department of Radio and Space Science, Advanced Receiver Development

Igor Lapkin

Chalmers, Department of Radio and Space Science, Advanced Receiver Development

Jacob Kooi

20th international Symposium on Space and Terahertz technology, Charlottesville, VA, USA, April 20-22, 2009

19-23

Subject Categories

Aerospace Engineering

Other Engineering and Technologies not elsewhere specified

Other Electrical Engineering, Electronic Engineering, Information Engineering

More information

Created

10/7/2017