Design of Transition from Coaxial Line to Ridge Gap Waveguide
Paper in proceeding, 2009
This paper presents the design of a simple transition from ridge gap waveguide to coaxial line transition. First, a straight ridge gap waveguide with single transition on end is simulated. Then a ridge gap waveguide with two 90° bends is simulated with two transitions on each end. Available commercial FDTD simulation tool was used to design the transitions. A return loss of -10 dB was achieved over the frequency band of 12- 15.75 GHz.
Author
Ashraf Uz Zaman
Chalmers, Signals and Systems, Communication, Antennas and Optical Networks
Eva Rajo
Chalmers, Signals and Systems, Communication, Antennas and Optical Networks
E. Alfonso
Polytechnic University of Valencia (UPV)
Per-Simon Kildal
Chalmers, Signals and Systems, Communication, Antennas and Optical Networks
2009 IEEE International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, APSURSI 2009; North Charleston, SC; United States; 1 June 2009 through 5 June 2009
1522-3965 (ISSN)
9781424436477 (ISBN)
Subject Categories
Electrical Engineering, Electronic Engineering, Information Engineering
DOI
10.1109/APS.2009.5172186
ISBN
9781424436477