Mechanical and thermo-physical properties of high-density polyethylene modified with talc
Journal article, 2013

The aim of this study was to examine the physical, mechanical, and thermo-physical properties of high-density polyethylene (HDPE) modified with talc. Different weight fractions of talc (up to 35 wt %) were compounded with an HDPE matrix containing 2.5 wt % of carbon black (CB) in a twin-screw compounder. The composites were then processed by injection moulding to obtain specimens for testing. The results indicate that CB causes a significant decrease in the toughness, while talc not only enhances the thermal conductivity and thermo-physical properties of the composites but can also play a role in compensating for the negative effects of CB on impact resistance. The experimental data show that the presence of CB reduces the impact resistance of HDPE by up to 34%, while addition of up to 8 wt % talc can return this value to close to that of pure HDPE. No significant effect on the composite tensile yield and fracture strength was observed for either component at all concentrations. The thermal conductivity, thermal diffusivity, and specific density values of the composites increased almost linearly, but the increase in moisture absorption in the long term showed nonlinear behavior in the concentration range of the experiment.

thermal properties


differential scanning calorimetry




A. K. Mehrjerdi

University of Borås

Bijan Adl-Zarrabi

Chalmers, Civil and Environmental Engineering, Building Technology

S. W. Cho

University of Borås

M. Skrifvars

University of Borås

Journal of Applied Polymer Science

0021-8995 (ISSN) 1097-4628 (eISSN)

Vol. 129 4 2128-2138

Subject Categories

Textile, Rubber and Polymeric Materials



More information

Latest update

3/8/2018 9