Mechanical and thermo-physical properties of high-density polyethylene modified with talc
Artikel i vetenskaplig tidskrift, 2013

The aim of this study was to examine the physical, mechanical, and thermo-physical properties of high-density polyethylene (HDPE) modified with talc. Different weight fractions of talc (up to 35 wt %) were compounded with an HDPE matrix containing 2.5 wt % of carbon black (CB) in a twin-screw compounder. The composites were then processed by injection moulding to obtain specimens for testing. The results indicate that CB causes a significant decrease in the toughness, while talc not only enhances the thermal conductivity and thermo-physical properties of the composites but can also play a role in compensating for the negative effects of CB on impact resistance. The experimental data show that the presence of CB reduces the impact resistance of HDPE by up to 34%, while addition of up to 8 wt % talc can return this value to close to that of pure HDPE. No significant effect on the composite tensile yield and fracture strength was observed for either component at all concentrations. The thermal conductivity, thermal diffusivity, and specific density values of the composites increased almost linearly, but the increase in moisture absorption in the long term showed nonlinear behavior in the concentration range of the experiment.

thermal properties

polyolefins

differential scanning calorimetry

blends

composites

Författare

A. K. Mehrjerdi

Högskolan i Borås

Bijan Adl-Zarrabi

Chalmers, Bygg- och miljöteknik, Byggnadsteknologi

S. W. Cho

Högskolan i Borås

M. Skrifvars

Högskolan i Borås

Journal of Applied Polymer Science

0021-8995 (ISSN) 1097-4628 (eISSN)

Vol. 129 2128-2138

Ämneskategorier

Textil-, gummi- och polymermaterial

DOI

10.1002/app.38945