Effects of cold working and heat treatment on microstructure and wear behaviour of Cu–Be alloy C17200
Journal article, 2015

© 2015 Institute of Materials, Minerals and Mining and W. S. Maney & Son Ltd. The effects of cold work process between aging and solution heat treatment on the microstructure, hardness and the tribologic behaviour of a copper–beryllium (Cu–Be) alloy C17200 were investigated. The wear behaviour of the alloys was studied using ‘pin on disc’ method under dry conditions. The results show that the formation of fine grained structure and γ phase particles enhances the mechanical properties of the alloy; nonetheless, they do not reduce the wear rate. This is attributed to the capability of the softer specimens to maintain oxygen rich compounds during the dry sliding test.

Electron microscopy

Casting

Wear

Non-ferrous alloys

Author

A. Khodabakhshi

Yazd University

V. Abouei

Islamic Azad University

Nooshin Mortazavi Seyedeh

Chalmers, Applied Physics, Materials Microstructure

S.H. Razavi

Iran University of Science and Technology

Hamed Hoseini Hooshyar

Chalmers, Chemistry and Chemical Engineering, Energy and Material, Environmental Inorganic Chemistry

Mohsen Esmaily

Chalmers, Chemistry and Chemical Engineering, Energy and Material, Environmental Inorganic Chemistry

Tribology - Materials, Surfaces and Interfaces

1751-5831 (ISSN) 1751-584X (eISSN)

Vol. 9 3 118-127

Subject Categories

Materials Engineering

DOI

10.1179/1751584X15Y.0000000009

More information

Created

10/7/2017