A New Battery Active Balancing Method with Supercapacitor Considering Regeneration Process
Paper in proceedings, 2020

Lithium-ion batteries have been widely used in new energy vehicles (NEV) as large energy storage systems (ESS). It is necessary to balance series-connected cells to avoid over-charging or over-discharging as well as to improve the amount of usable energy. This paper starts with a comprehensive review of the existing strategies and gives a battery balancing category. A new balancing topology with its control algorithms is then introduced. A supercapacitor is used in the balancing circuit which replaces the highest state of charge (SOC) cell and is charged during the vehicle regeneration process. The supercapacitor also transfers energy to the lowest SOC cell after it is fully charged. This new strategy can not only improve the balancing efficiency due to fewer times of energy conversion but also reduce the required balancing time compared to single capacitor balancing.

Lithium-ion battery

Full-electric powertrain

Active balancing

Supercapacitor

Battery management system

Author

Bowen Jiang

Chalmers, Electrical Engineering, Electric Power Engineering, Electrical Machines and Power Electronics

Yujing Liu

Chalmers, Electrical Engineering, Electric Power Engineering, Electrical Machines and Power Electronics

Xiaoliang Huang

Chalmers, Electrical Engineering, Electric Power Engineering, Electrical Machines and Power Electronics

Ranjithh Raj Ram Prakash

AVL MTC

IECON Proceedings (Industrial Electronics Conference)

Vol. 2020-October 18 October 2020 2364-2369 9254839

46th Annual Conference of the IEEE Industrial Electronics Society, IECON 2020
Virtual; online, Singapore,

Subject Categories

Accelerator Physics and Instrumentation

Other Chemical Engineering

Energy Systems

DOI

10.1109/IECON43393.2020.9254839

More information

Latest update

1/7/2021 1