Low-temperature CO oxidation over a Pt/Al2O3 monolith catalyst investigated by step-response experiments and simulations
Journal article, 2004

The ignition–extinction processes for CO oxidation over a Pt/Al2O3 monolith catalyst have been studied by flow-reactor experiments and simulations. The study was performed by stepwise changes of the inlet O2 concentration ranging 0–20 vol% while the CO concentration and the inlet gas temperature were kept constant at 1.0 vol% and 423 K, respectively. Several features observed experimentally are qualitatively simulated with our model: (i) the ignition of the CO oxidation demands 8.0vol% O2 (ii) corresponding to a catalyst ignition temperature of 433 K (due to the exothermicity of the reaction) and (iii) occurs in the rear part of the monolith where (iv) a local reaction zone is formed which (v) moves towards the reactor inlet as a function of time on stream. Additionally, the simulations show first order kinetic phase transitions, i.e. rapid adsorbate concentration changes, where the catalyst surface is predominantly CO covered in the low reactive state and almost completely oxygen covered in the high reactive state. For the ignition process the kinetic phase transition occurs after the actual catalytic ignition. However, the extinction process is more difficult to simulate dynamically without changing the model parameters for O2 adsorption in the low and high reactive state, respectively. The influence of diffusion limitations and the role of formation of a less reactive Pt state under oxidising conditions is discussed.

step-response experiment

Pt/Al2O3

simulations

self-poisoning

low-temperature activity

catalytic ignition

mean-field modelling

CO oxidation

catalytic extinction

cold-start

Author

Per-Anders Carlsson

Competence Centre for Catalysis (KCK)

Chalmers, Chemical and Biological Engineering, Chemical Reaction Engineering

Magnus Skoglundh

Chalmers, Chemical and Biological Engineering, Applied Surface Chemistry

Competence Centre for Catalysis (KCK)

Peter Thormählen

Chalmers, Applied Physics, Chemical Physics

Competence Centre for Catalysis (KCK)

Bengt Andersson

Competence Centre for Catalysis (KCK)

Chalmers, Chemical and Biological Engineering, Chemical Reaction Engineering

Topics in Catalysis

1022-5528 (ISSN) 1572-9028 (eISSN)

Vol. 30/31 1-4 375-381

Driving Forces

Sustainable development

Areas of Advance

Nanoscience and Nanotechnology

Transport

Energy

Materials Science

Subject Categories

Chemical Process Engineering

Chemical Engineering

Environmental Sciences

More information

Latest update

10/11/2023