Charge decay on enamel wire surface
Paper in proceeding, 2014
Partial discharge resistant enamel insulation filled with chromium oxide (Cr2O3) has been developed recently. In the paper, dynamics of surface charges on samples of the material is analyzed and is compared with that on conventional enamel. The experiments were conducted on test objects prepared as windings of enameled wires. Surface charging was implemented using dc corona from a needle electrode which was placed against the grounded winding. After charging, the potential induced by deposited charges was measured by non-contact technique. The surface charge density pattern was reconstructed utilizing Φ-matrix method. The decay of charges accumulated on insulation surfaces was recorded. It was found that the decay process was considerably faster for the filled enamel than for the conventional one, which may be one of the factors contributing to the improved partial discharge resistance of the former.
Author
Tuan Anh Hoang
Student at Chalmers
Yuriy Serdyuk
Chalmers, Materials and Manufacturing Technology, High Voltage Engineering
Stanislaw Gubanski
Chalmers, Materials and Manufacturing Technology, High Voltage Engineering
Proceedings of International Conference on High Voltage Engineering and Application 2014 (ICHVE 2014), ISBN 978-1-4799-6613-4
1-4, paper A-4-3-
978-1-4799-6613-4 (ISBN)
Areas of Advance
Energy
Subject Categories
Other Materials Engineering
Other Electrical Engineering, Electronic Engineering, Information Engineering
DOI
10.1109/ICHVE.2014.7035399