Corrosion behaviour of friction stir-welded AA6005-T6 using a bobbin tool
Journal article, 2016
The atmospheric corrosion of extruded AA6005-T6 weldments produced with bobbin friction stir welding (BFSW) using fast and slow process parameters has been analyzed. The weldments of the same material fabricated using conventional FSW were also exposed as reference. Copper-rich phase particles were detected at the grain boundaries in the stir zone of both specimens. It was evident that the BFSW specimens exhibit better corrosion behaviour than the specimens produced using the slow process parameters. An effort was made to carefully attribute the improved corrosion resistance of the fast BFSW specimens to the difference in the microstructure of the weldments. (C) 2016 Elsevier Ltd. All rights reserved.
speed
microstructural evolution
mg
Atmospheric corrosion
mechanical-properties
welding
2a14-t6 aluminum-alloy
Welding
intermetallic phases
Alloy
induced atmospheric corrosion
pitting corrosion
Metallurgy & Metallurgical Engineering
Materials Science
Aluminium
crystal-structure
localized corrosion
Author
Mohsen Esmaily
Chalmers, Chemistry and Chemical Engineering, Energy and Material
Nooshin Mortazavi Seyedeh
Chalmers, Physics, Materials Microstructure
W. Osikowicz
Sapa Technology
H. Hindsefelt
Sapa Technology
Jan-Erik Svensson
Chalmers, Chemistry and Chemical Engineering, Energy and Material
Mats Halvarsson
Chalmers, Physics, Materials Microstructure
G. E. Thompson
University of Manchester
Lars-Gunnar Johansson
Chalmers, Chemistry and Chemical Engineering, Energy and Material
Corrosion Science
0010-938X (ISSN)
Vol. 111 98-109Subject Categories
Materials Engineering
Corrosion Engineering
Areas of Advance
Materials Science
DOI
10.1016/j.corsci.2016.04.046