Biofouling on mooring lines and power cables used in wave energy converter systems - analysis of fatigue life and energy performance
Journal article, 2017

This study presents an analysis of a wave energy converter (WEC) system consisting of a buoy, a mooring system, and a power cable connected to a hub. The investigated WEC system is currently under full-scale testing near Runde in Norway. The purpose of the study was to investigate the characteristics of the entire system, primarily with regard to energy performance and the fatigue life of the mooring lines and power cable, considering the effects of marine biofouling and its growth on the system’s components. By means of parametric study, the energy performance and fatigue life of the mooring lines and power cable were investigated considering two mooring configurations, three biofouling conditions, four sea states in a scatter diagram, and three wave and current directions. Hydrodynamic and structural response simulations were conducted in a coupled response analysis using the DNV-GL software SESAM. Energy performance analyses and stress-based rainflow counting fatigue calculations were performed separately using an in-house code. The results show that, for a WEC system which has been deployed for 25 years, biofouling can reduce the total power absorption by up to 10% and decrease the fatigue life of the mooring lines by approximately 20%.

power cable

catenary mooring chain

wave energy converter

biofouling

power absorption

fatigue

Author

Shun-Han Yang

Chalmers, Shipping and Marine Technology, Marine Technology

Jonas Ringsberg

Chalmers, Shipping and Marine Technology, Marine Technology

Erland Johnson

Chalmers, Shipping and Marine Technology, Marine Technology

RISE Research Institutes of Sweden

ZhiQiang Hu

Newcastle University

Applied Ocean Research

0141-1187 (ISSN)

Vol. 65 1 166-177

Chalmers Area of Advance Transport – funding 2017

Chalmers, 2017-01-01 -- 2017-12-31.

Simulation model for operation and maintenance strategy of floating wave energy converters - analysis of fatigue, wear, and influence of biofouling for effective and profitable energy harvesting

Swedish Energy Agency, 2016-06-01 -- 2018-05-31.

Driving Forces

Sustainable development

Innovation and entrepreneurship

Subject Categories

Materials Engineering

Energy Engineering

Vehicle Engineering

Marine Engineering

Areas of Advance

Transport

Energy

Materials Science

Roots

Basic sciences

DOI

10.1016/j.apor.2017.04.002

More information

Latest update

10/11/2018