2D hybrid modeling of defects in an ultrasonic inspection situation
Licentiate thesis, 2021
The reliability of NDE methods and the interaction between applied energy and addressed defect is highly dependent on the equipment adjustment to a specific object and to the expectation of the crack features. The crack feature and morphology vary widely between different crack mechanisms and between material types, in which crack appears.
Complex shaped defects, such as fatigue and stress corrosion cracks (SCC), are in many cases difficult to characterize with ultrasonic NDE methods. SCC has in many cases a heavily branched macroscopic shape with a large number of crack tips. Ultrasonic NDE method is not always reliable in sizing such defects, as the diffraction from the crack tips is commonly used as the basis for such analysis. In this case, thoroughly validated mathematical models could be used to do the parametrical studies that address such interactions.
In the current work, a developed hybrid model is described. This model is based on a combination of a semi-analytical model with a numerical approach. The basic idea is to use the numerical solution for interaction between the wave and the complex shape defect, which could be done by surrounding it with a volume modelled by a finite element scheme. The analytical method is used for describing the wave propagation between the probe and the volume that contains the actual defect.
Using hybrid models for parametrical study, could help to avoid costly and time-consuming experimental work.
Finite element method
Chalmers, Industrial and Materials Science, Engineering Materials
Comparison between three mathematical models of three well defined ultrasonic NDT cases
IOP Conference Series: Materials Science and Engineering,; Vol. 747(2020)
Paper in proceeding
Semenova, M, Wirdelius, H, Parametrical study in hybrid modeling of an ultrasonic inspection situation
The Swedish Radiation Safety authority (SSM) (SS2017-722), 2017-07-01 -- 2021-12-31.
Other Materials Engineering
Metallurgy and Metallic Materials
Areas of Advance
Thesis for the degree of licentiate of engineering - Chalmers University of Technology, Division of Solid Mechanics, Thesis: IMS-2021-13
Chalmers University of Technology
IMS conference room, 5th floor building Jupiter at campus Lindholmen
Opponent: PhD Jonathan Westlund, Volvo Cars, Sweden