Lars-Erik Svensson

Visar 10 publikationer

2013

The Right Evaluation Method - an Enabler for Process Improvement

Anna Öberg, Peter Hammersberg, Lars-Erik Svensson
International Conference on Joining Materials, 5-8 May 2013, Helsingor
Paper i proceeding
2012

Characterization of cold lap defects in tandem arc welding

Peigang Li, Lars-Erik Svensson, Per Nylén et al
Welding in the World, Le Soudage Dans Le Monde. Vol. 56 (9-10), p. 20-25
Artikel i vetenskaplig tidskrift
2012

Selection of Evaluation Methods for New Weld Demands: Pitfalls and Possible Solutions

Anna Öberg, Peter Hammersberg, Lars-Erik Svensson
18th World Conference on Non-Destructive testing. Vol. 2012
Paper i proceeding
2012

The Influence of Correct Transfer of Weld Information on Production Cost

Anna Öberg, Johansson Martin, Erik Jarl Holm et al
Proceedings of The 5th International Swedish Production Symposium. Vol. 2012, p. 295-302
Paper i proceeding
2011

Stability of shot peening induced residual stresses and their influence on fatigue lifetime

Kamellia Dalaei, Birger Karlsson, Lars-Erik Svensson
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. Vol. 528 (3), p. 1008-1015
Artikel i vetenskaplig tidskrift
2010

Stability of Residual stresses Created by Shot Peening of Pearlitic Steel and Their Influence on Fatigue Behaviour

Kamellia Dalaei, Birger Karlsson, Lars-Erik Svensson
10th International Fatigue Congress, FATIGUE 2010; Prague; Czech Republic; 6 June 2010 through 11 June 2010. Vol. 2 (2), p. 613-622
Paper i proceeding
2009

Microstructure development during tempering of the hot-work tool steel Uddeholm QRO 90 Supreme

Jörgen Andersson, Hans-Olof Andrén, Lars-Erik Svensson et al
Proc. 8th Int Tooling Conf., Eds. P Beiss, C Broeckmann, S Franke and B Keysselitz, RWTH Aachen Univ, Aachen, Germany. Vol. II, p. 611-623
Paper i proceeding
2009

An Investigation on Fracture Surfaces of Shot Blasted and As Forged Componants in Constant and Variable Loading Fatigue

Kamellia Dalaei, Birger Karlsson, Lars-Erik Svensson et al
Proceedings of the International Conference on Crack Paths (CP2009). Editor: European Structural Integrity Society, p. 233-243
Paper i proceeding
2008

Influence of decarburisation on the fatigue behaviour of shot peened spring steels

Kamellia Dalaei, Jonas Höijer, Gunnar Åkerström et al
Proc. 10th Intern. Conf. on Shot Peening (K. Tosha, ed.), Academy Common Meiji University, Tokyo, Sept. 2008, p. 274-279
Paper i proceeding
2006

New developments with C-Mn-Ni high strength steel weld metals—Part B, Mechanical properties

Enda Keehan, Leif Karlsson, Hans-Olof Andrén et al
Welding Journal. Vol. 85 (10), p. 218s-224s
Artikel i vetenskaplig tidskrift

Ladda ner publikationslistor

Du kan ladda ner denna lista till din dator.

Filtrera och ladda ner publikationslista

Som inloggad användare hittar du ytterligare funktioner i MyResearch.

Du kan även exportera direkt till Zotero eller Mendeley genom webbläsarplugins. Dessa hittar du här:

Zotero Connector
Mendeley Web Importer

Tjänsten SwePub erbjuder uttag av Researchs listor i andra format, till exempel kan du få uttag av publikationer enligt Harvard och Oxford i .RIS, BibTex och RefWorks-format.

Det finns inga projekt att visa.
Det kan finnas fler projekt där Lars-Erik Svensson medverkar, men du måste vara inloggad som anställd på Chalmers för att kunna se dem.