High energy lithium sulphur cells and batteries (HELIS)
Forskningsprojekt, 2015 – 2019

Lithium sulphur batteries (LSB) are viable candidate for commercialisation among all post Li-ion battery technologies due to their high theoretical energy density and cost effectiveness. Despites many efforts, there are remaining issues that need to be solved and this will provide final direction of LSB technological development. Some of technological aspects, like development of host matrices, interactions of host matrix with polysulphides and interactions between sulphur and electrolyte have been successfully developed within Eurolis project. Open porosity of the cathode, interactions between host matrices and polysulphides and proper solvatation of polysulphides turned to be important for complete utilisation of sulphur, however with this approach didn’t result long term cycling. Additionally we showed that effective separation between electrodes enables stable cycling with excellent coulombic efficiency. The remaining issues are mainly connected with a stability of lithium anode during cycling, with engineering of complete cell and with questions about LSB cells implementation into commercial products (aging, safety, recycling, battery packs). Instability of lithium metal in most of conventional electrolytes and formation of dendrites due to uneven distribution of lithium upon the deposition cause several difficulties. Safety problems connected with dendrites and low coulombic efficiency with a constant increase of inner resistance due to electrolyte degradation represent main technological challenges. From this point of view, stabilisation of lithium metal will have an impact on safety issues. Stabilised interface layer is important from view of engineering of cathode composite and separator porosity since this is important parameter for electrolyte accommodation and volume expansion adjustment. Finally the mechanism of LSB ageing can determine the practical applicability of LSB in different applications.


Patrik Johansson (kontakt)

Kondenserade materiens fysik


Accurec Recycling

Krefeld, Germany

Catalonia Institute for Energy Research (IREC)

Barcelona, Spain

Centre national de la recherche scientifique (CNRS)

Paris, France


Munchen, Germany

Institut National de l'Environnement Industriel et des Risques (INERIS)

Verneuil En Halatte, France

Kemijski Inštitut

Ljubljana, Slovenia


München, Germany

Peugeot Citroen Automobiles

Velizy-Villacoublay, France


Espoo, Finland


Bagnolet, France


Toulouse, France

Tel Aviv University

Tel Aviv, Israel

Universität Münster

Münster, Germany


Europeiska kommissionen (EU)

Projekt-id: EC/H2020/666221
Finansierar Chalmers deltagande under 2015–2019

Relaterade styrkeområden och infrastruktur

Hållbar utveckling



Mer information

Projektets webbplats


Senast uppdaterat