Unexpected experimental results for capillary suction in wood: Analysis on the fibre level
Artikel i vetenskaplig tidskrift, 2008

A series of simple experiments on capillary water uptake in rectangular sticks of Pinus silvestris gave some unexpected results. Sticks of sapwood and heartwood with lengths of 100, 200 and 300 mm, with the four long sides sealed, were used in the experiments. The samples were allowed to suck water, one group for 1000 h and one group for1900 hours. After exposure, as anticipated, the heartwood samples had received a moisture content (MC) distribution with high values at the bottom and steeply decreasing values towards the top. The sapwood samples, on the other hand, had moisture distributions with high MC at the bottom and the top, and low MC in the middle. Additional experiments to study flow paths and time scales of the process were performed using dyed water. A Fickian approach is discussed, in some detail. It is clear that the process represented by the experimental results cannot be explained within a Fickian framework. The analysis has to be made on fiber level, where an explanation is proposed. The influence from bordered pits is of significant importance and their resistance dominates the time scales. A key factor in the proposed explanation is the high lateral capillary conductivity within the saw-damaged top surface. However, some questions remain unanswered.

capillary suction

longitudinal

wood

bordered pits

Abnormal moisture accumulation

non-Fickian moisture flow

Författare

Ingemar Segerholm

Chalmers, Bygg- och miljöteknik, Byggnadsteknologi

Johan Claesson

Chalmers, Bygg- och miljöteknik, Byggnadsteknologi

Wood Material Science and Engineering

1748-0272 (ISSN) 1748-0280 (eISSN)

Vol. 3 109-118

Ämneskategorier

Fysik

Husbyggnad

DOI

10.1080/17480270902909466