Simulation based optimization of a sheet-metal press line
Paper i proceeding, 2009

An off-line optimization of a sheet-metal press line is performed with improved production performances, both in terms of increased production rate and smoother robot motions. Smooth motions prevent the sheet-metal to slide out of position or even fall out, thereby causing lengthy down times. The simulation based method use a process optimizer connected to a time synchronized virtual manufacturing model including real industrial control systems, e.g. PLC. The key benefit herein is that all tuned control system parameters can be directly downloaded to the real press line without any post-processing or transformations. The challenge to find suitable optimization algorithms for a press line that handle highly nonlinear, discontinuous functions; considerable number of parameters; and long evaluation times is reached.

Författare

Bo Svensson

Högskolan Väst

Fredrik Danielsson

Högskolan Väst

Bengt Lennartson

Chalmers, Signaler och system, System- och reglerteknik, Automation

2009 IEEE 14th International Conference on Emerging Technologies & Factory Automation, ETFA 2009, Mallorca, Spain

Ämneskategorier

Elektroteknik och elektronik

DOI

10.1109/ETFA.2009.5346992

ISBN

978-142442728-4

Mer information

Senast uppdaterat

2018-04-18