Applying process integration methods to target for electricity production from industrial waste heat using Organic Rankine Cycle (ORC) technology
Paper i proceeding, 2011

This paper presents the results of an investigation of power production from low temperature excess process heat from a chemical cluster using Organic Rankine Cycle (ORC) technology. Process simulations and process integration methods including Pinch Technology and Total Site Analysis (TSA) are used to estimate the potential for electricity production from excess heat from the cluster. Results of a previous TSA study indicate that ca. 192 MWheat of waste heat are available at 84 °C to 55 °C, a suitable temperature range for ORC applications. Process streams especially suitable for ORC power production are identified. Simulation results indicate that 14 MWheat of waste heat are available from a PE-reactor, which can be used to generate ca. 1 MWel. Costs of electricity production calculated range from 70 to 147 €/MWh depending on the cost for ORC integration. Economic risk evaluation indicates that pay-back periods lower than 4.5 years should not be expected at the electricity price and RES-E support (a European support system for renewable electricity) levels considered in this study. CO2 emission reductions of up to 5900 tonnes/year were estimated for the analysed case.

Waste heat recovery.

Total site analysis

Process integration

Organic Rankine Cycle

Författare

Roman Hackl

Industriella energisystem och -tekniker

Simon Harvey

Industriella energisystem och -tekniker

World Renewable Energy Congress 2011 – Sweden 8-11 May 2011, Linköping, Sweden - Industrial Energy Efficiency (IEE)

Styrkeområden

Energi

Ämneskategorier

Kemiska processer

DOI

10.3384/ecp110571716

Mer information

Skapat

2017-10-08