Noise and Aliasing Aspects in a Multiharmonic-Dielectric-Response-Measurement System
Paper i proceeding, 2011

Dielectric-response measurements are commonly performed with frequency-domain spectroscopy, polarization/depolarization-current measurements, or return-voltage measurements. These techniques operate in a frequency or time domain, and all have high requirements on the voltage source in order to acquire accurate results. This limits dielectric-response measurements to offline applications. A new technique, which is called arbitrary-waveform- impedance spectroscopy, has been developed, which makes use of the harmonics of any voltage waveform to perform dielectric-response measurements. The technique provides possibilities for online measurements facilitating the monitoring of materials and components in high-voltage applications. Here, the different aspects of the measurement system are presented, including circuit modeling, normalization, and discussions on aliasing and noise; all of them are necessary to control in order to perform accurate measurements. © 2011 IEEE.

Författare

Björn Sonerud

Chalmers, Material- och tillverkningsteknik, Högspänningsteknik

Tord Bengtsson

ABB Corporate Research Center

Jörgen Blennow

Chalmers, Material- och tillverkningsteknik, Högspänningsteknik

Stanislaw Gubanski

Chalmers, Material- och tillverkningsteknik, Högspänningsteknik

IEEE Transactions on Instrumentation and Measurement

0018-9456 (ISSN)

Vol. 60 13 3875-3882

Styrkeområden

Energi

Materialvetenskap

Ämneskategorier

Reglerteknik

Annan elektroteknik och elektronik

DOI

10.1109/TIM.2011.2147570