Hybrid micro-macromechanical modelling of anisotropy evolution in pearlitic steel
Artikel i vetenskaplig tidskrift, 2012

Large shearing and/or stretching of pearlitic steel leads to a re-orientation and alignment of cementite lamellas on the microscopic level. In this paper a macroscopic model formulated for large strains is proposed for pearlitic steel that captures this re-orientation by adopting an areal-affine assumption. The re-orientation of the cementite lamellas influences the macroscopic yield function via homogenization of the normals to the cementite lamellas. Thereby, the re-orientation leads to a distortional hardening of the yield surface. Additionally, the model is formulated in a large strain setting by using the multiplicative split of the deformation gradient and includes non-linear isotropic as well as kinematic hardening. The proposed model is implemented by using a backward Euler technique for the evolution equations together with the integration on the unit sphere to compute homogenized quantities. Finally, numerical results are evaluated and compared to experimental results for wire drawing of pearlitic steel reported in literature.

Homogenization

Evolving anisotropy

Plasticity

Finite strains

Pearlitic steel

Författare

NASIM LARIJANI

Chalmers, Tillämpad mekanik, Material- och beräkningsmekanik

Göran Johansson

Chalmers, Tillämpad mekanik, Material- och beräkningsmekanik

Magnus Ekh

Chalmers, Tillämpad mekanik, Material- och beräkningsmekanik

European Journal of Mechanics, A/Solids

0997-7538 (ISSN)

Vol. 38 37-47

Drivkrafter

Hållbar utveckling

Ämneskategorier

Teknisk mekanik

Styrkeområden

Materialvetenskap

DOI

10.1016/j.euromechsol.2012.09.011

Mer information

Skapat

2017-10-07