Influence of pressure on the minimum fluidization velocity
Artikel i vetenskaplig tidskrift, 1991

The influence of pressure on minimum fluidization velocity has been measured in a pressurized fluidized bed. Three different bed materials, corresponding to Geldart's group B or group D particles, were investigated at pressures between 0.1 and 1.6 MPa. The onset of fluidization was determined both visually and by pressure drop measurements. The results show a clear decrease in the minimum fluidization velocity with increasing pressure. The experimental results are in good accord with results obtained using the Ergun equation. A number of simplified correlations derived from the Ergun equation were also investigated. While many of these give a good description of the pressure effect, their accuracy varies significantly for different bed materials.

Författare

Per Olowson

Alf-Erik Almstedt

Chalmers, Tillämpad mekanik

Chalmers, Institutionen för termo- och fluiddynamik

Chemical Engineering Science

0009-2509 (ISSN)

Vol. 46 2 637-640

Ämneskategorier

Kemiteknik

Strömningsmekanik och akustik

DOI

10.1016/0009-2509(91)80023-R

Mer information

Skapat

2017-10-06