Comparison of Eigenmode Extraction Techniques for Separated Nozzle Flows
Paper i proceeding, 2014

Results of a previously published Arnoldi eigenmode analysis on a separated flow inside a convergent-divergent nozzle are compared with results obtained using a Dynamic Mode Decomposition (DMD) algorithm. The Arnoldi analysis employs a linearized flow solver and as a result, does not consider nonlinearity and turbulence. The DMD method is a snapshot- based approach, which approximates the Koopman modes of the nonlinear flow. In the present study the DMD algorithm has been applied to a data set from a two-dimensional URANS simulation of the separated nozzle flow. As such, it can take into account the full information of the nonlinear flow, including turbulence. The objective of this study is to investigate the effects of turbulence on the linear analysis. The results show that the Arnoldi and the DMD algorithms do in certain cases produce almost identical modes in terms of frequency, damping and structure. This indicates that even though the Arnoldi method needs an explicit linearization of the flow dynamics and excludes turbulence, it does reveal modes with discrete frequency that could be excited in the nonlinear flow with modeled turbulence.

Arnoldi

aeroacoustics

DMD

Dynamic Mode Decomposition

CFD

Linear stability analysis

Författare

Ragnar Larusson

Chalmers, Tillämpad mekanik, Strömningslära

Niklas Andersson

Chalmers, Tillämpad mekanik, Strömningslära

Lars-Erik Eriksson

Chalmers, Tillämpad mekanik, Strömningslära

Jan Östlund

GKN Aerospace

50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and exhibit 2014; Cleveland; United States; 28 July 2014 through 30 July 2014

Ämneskategorier

Rymd- och flygteknik

Strömningsmekanik och akustik

DOI

10.2514/6.2014-4003

ISBN

978-162410303-2

Mer information

Skapat

2017-10-07