Direct Measurement of Superconducting Tunnel Junction Capacitance
Artikel i vetenskaplig tidskrift, 2015

The Superconductor-Insulator-Superconductor (SIS) junction is the key component for millimeter and submillimeter mixers for radio astronomy and environmental science. The capacitance of the SIS mixer determines both the RF and IF performance. Previously, measurements of this capacitance has had high uncertainty. Herein, we determine the SIS junction capacitance at cryogenic temperature (~4 K) by direct measurement of the SIS junction impedance at microwave frequencies. The proposed calibration method uses only one short-circuit reference. The SIS junction capacitance measurement is realized by biasing the junction at the different parts of its current-voltage characteristic, thus eliminating a separate measurement of short-circuit standard. In order to verify the measurement results, thin-film capacitors with known capacitance were also measured. The capacitance of four SIS junctions with various areas were measured. The absolute uncertainty of the proposed measurement method was found to vary from 5 to 6.8 % amongst different junction areas.

Författare

Parisa Yadranjee Aghdam

Chalmers, Rymd- och geovetenskap, Avancerad mottagarutveckling

Hawal Marouf Rashid

Chalmers, Rymd- och geovetenskap, Avancerad mottagarutveckling

Alexey Pavolotskiy

Chalmers, Rymd- och geovetenskap, Avancerad mottagarutveckling

Vincent Desmaris

Chalmers, Rymd- och geovetenskap, Avancerad mottagarutveckling

Denis Meledin

Chalmers, Rymd- och geovetenskap, Avancerad mottagarutveckling

Victor Belitsky

Chalmers, Rymd- och geovetenskap, Avancerad mottagarutveckling

IEEE Transactions on Terahertz Science and Technology

2156-342X (ISSN)

Vol. 5 3 464-469 7069183

Ämneskategorier

Annan teknik

Annan elektroteknik och elektronik

Den kondenserade materiens fysik

Infrastruktur

Onsala rymdobservatorium

Nanotekniklaboratoriet

DOI

10.1109/TTHZ.2015.2413214

Mer information

Skapat

2017-10-07