Surface properties of recycled titanium oxide recovered from paint waste
Artikel i vetenskaplig tidskrift, 2018

Aluminium oxide coated rutile pigment was extracted from a paint matrix by means of a thermal recycling process. The objective was to investigate the effect of the recycling process on the surface properties of the pigment. The pigment was analysed using powder x-ray diffraction (XRD), surface area measurements (BET), laser diffraction for particle size analysis and X-ray photoelectron spectroscopy (XPS) before and after the recycling process. Investigations on the zeta potential and the surface charge were performed as well. It was concluded that the rutile crystalline core and the aluminium oxide coating of the pigment were still intact after the recycling process. The particle size distribution of the recycled pigment was slightly broader compared to the virgin pigment. The measured magnitude in zeta potential of the recycled pigment was lower than for the virgin pigment. This difference is thought to be caused by alteration in the surface hydroxyl concentration. Surface charge titrations showed differences between the virgin and the recycled pigment at alkaline pH and at low salt concentrations.

Paint

Surface charge

Titanium oxide

Zeta potential

Recycling

Pigment

Författare

Mikael Karlsson

Chalmers, Kemi och kemiteknik, Energi och material

Zareen Abbas

Göteborgs universitet

Romain Bordes

Chalmers, Kemi och kemiteknik, Tillämpad kemi

Yu Cao

Chalmers, Industri- och materialvetenskap, Material och tillverkning

Anders Larsson

RISE Research Institutes of Sweden

Antonin Rolland

Chalmers, Kemi och kemiteknik

Phil Taylor

Akzo Nobel, UK

Britt-Marie Steenari

Chalmers, Kemi och kemiteknik, Energi och material

Progress in Organic Coatings

0300-9440 (ISSN)

Vol. 125 279-286

Ämneskategorier

Oorganisk kemi

Bearbetnings-, yt- och fogningsteknik

Materialkemi

DOI

10.1016/j.porgcoat.2018.09.012

Mer information

Senast uppdaterat

2018-10-08