Direct yaw moment control for enhancing handling quality of lightweight electric vehicles with large load-to-curb weight ratio
Artikel i vetenskaplig tidskrift, 2019

In this paper a vehicle dynamics control system is designed to compensate the change in vehicle handling dynamics of lightweight vehicles due to variation in loading conditions and the effectiveness of the proposed design is verified by simulations and an experimental study using a fixed-base driving simulator. Considering the electrification of future mobility, the target vehicle of this research is a lightweight vehicle equipped with in-wheel motors that can generate an additional direct yaw moment by transverse distribution of traction forces to control vehicle yawing as well as side slip motions. Previously, the change in vehicle handling dynamics for various loading conditions have been analyzed by using a linear two-wheel vehicle model in planar motion and a control law of the DYC system based on feed-forward of front steering angular velocity and feedback of vehicle yaw rate. The feed-forward controller is derived based on the model following control with approximation of the vehicle dynamics to 1st-order transfer function. To make the determination of the yaw rate feedback gain model-based and adaptable to various vehicle velocity conditions, this paper selects a method where the yaw rate feedback gain in the DYC system is determined in a way that the steady-state yaw rate gain of the controlled loaded vehicle matches the gain of the unloaded vehicle. The DYC system is simulated in a single lane change maneuver to confirm the improved responsiveness of the vehicle while simulations of a double-lane change maneuver with a driver steering model confirms the effectiveness of the DYC system to support tracking control. Finally, the effectiveness of the proposed DYC system is also verified in an experimental study with ten human drivers using a fix-based driving simulator.

Vehicle dynamics control

Lightweight design

Direct yaw moment control (DYC)


Pongsathom Raksincharoensak

Tokyo University of Agriculture and Technology

Sato Daisuke

Tokyo University of Agriculture and Technology

Mathias R Lidberg

Chalmers, Mekanik och maritima vetenskaper, Fordonsteknik och autonoma system

Applied Sciences (Switzerland)

20763417 (eISSN)

Vol. 9 6 1151



Robotteknik och automation




Mer information

Senast uppdaterat