Distributed optical fiber sensing bonding techniques performance for embedment inside reinforced concrete structures
Artikel i vetenskaplig tidskrift, 2020

Distributed optical fiber sensors (DOFS) are modern-day cutting-edge monitoring tools that are quickly acquiring relevance in structural health monitoring engineering. Their most ambitious use is embedded inside plain or reinforced concrete (RC) structures with the scope of comprehending their inner-workings and the functioning of the concrete-reinforcement interaction. Yet, multiple studies have shown that the bonding technique with which the DOFS are bonded to the reinforcement bars has a significant role on the quality of the extracted strain data. Whilst this influence has been studied for externally bonded DOFS, it has not been done for embedded ones. The present article is set on performing such study by monitoring the strain measurement quality as sampled by DOFS bonded to multiple rebars with different techniques and adhesives. These instrumented rebars are used to produce differently sized RC ties later tested in tension. The discussion of the test outputs highlights the quasi-optimal performance of a DOFS/rebar bonding technique consisting of incising a groove in the rebar, positioning the DOFS inside it, bonding it with cyanoacrylate and later adding a protective layer of silicone. The resulting data is mostly noisefree and anomalies-free, yet still presents a newly diagnosed hitch that needs addressing in future research.

Distributed sensing

Optical fibers

Reinforced concrete

Steel strains

Structural health monitoring

Författare

Mattia Francesco Bado

Vilniaus Gedimino technikos universitetas

Universitat Politecnica de Catalunya

Joan R. Casas

Universitat Politecnica de Catalunya

Alinda Dey

Vilniaus Gedimino technikos universitetas

Carlos Gil Berrocal

Chalmers, Arkitektur och samhällsbyggnadsteknik, Konstruktionsteknik

Sensors

1424-8220 (ISSN) 1424-3210 (eISSN)

Vol. 20 20 1-23 5788

Ämneskategorier

Medicinsk laboratorie- och mätteknik

Annan medicinteknik

Annan materialteknik

DOI

10.3390/s20205788

PubMed

33066138

Mer information

Senast uppdaterat

2020-11-09