An Optimization-Based Topology Error Detection Method for Power System State Estimation
Artikel i vetenskaplig tidskrift, 2022

The paper presents an optimization-based method for topology error detection in power systems. The method utilizes the residual analysis in state estimation and minimization of normalized measurement residual, with the application of matrix inverse lemma. The work considers a hybrid measurement configuration, i.e., both SCADA and PMU measurements, for the test systems studied. The proposed method is implemented on the TOMLAB optimization platform under the mixed integer nonlinear programming category. The proposed method has been applied and tested on standard IEEE 14-bus and IEEE 118-bus test systems. The method is designed to be computationally efficient and produces accurate results for single topology error detection. The results from the IEEE 14-bus and IEEE 118-bus test systems have shown that the proposed method produces 100% and 94% accurate results for single topology error detection, respectively. The proposed method performs robustly with the increased measurement uncertainties and inclusion of bad data or gross errors in the measurements. The method has superiority in practical implementation over the meta-heuristics-based optimization methods. The proposed method can be easily implemented and could have potential application in the energy management systems of the power system control center.

Network topology

Optimization

State estimation

Phasor measurement units

Topology error detection

Författare

Ankur Srivastava

Chalmers, Elektroteknik, Elkraftteknik, Elnät och komponenter

Saikat Chakrabarti

Indian Institute of Technology Kanpur

Joao Soares

Instituto Politécnico do Porto

Sri Niwas Singh

Indian Institute of Technology Kanpur

Electric Power Systems Research

0378-7796 (ISSN)

Vol. 209 107914

Styrkeområden

Energi

Ämneskategorier

Elektroteknik och elektronik

DOI

10.1016/j.epsr.2022.107914

Mer information

Senast uppdaterat

2022-04-25