Sustainable Energy Conversion from Biomass Waste Combustion - Experimental and Multiscale Modelling Studies
Doktorsavhandling, 2022
To facilitate accurate prediction of particle pyrolysis and combustion, a computationally efficient sub-grid model of biomass particle model is developed. The developed particle model that relies on the orthogonal collocation method and a comprehensive physicochemical mechanism is proven to be accurate based on a high degree of agreement with experimental results for particle pyrolysis and combustion experiments. Improved prediction of mass transfer to and from spherical particles during pyrolysis and combustion is also analyzed in the current work by the correction of Sherwood number due to Stefan flow. High resolved computational fluid dynamics (CFD) analysis confirms that the proposed corrected Sherwood number produced better agreement in comparison to the established Spalding and Abrahamson model.
Grate-fired biomass furnace is designed and constructed in the current work to allow accurate observation of combustion parameters in different combustion conditions. Online spatially resolved PM measurement system allows accurate in-situ measurement of PM reactivity. The steady CFD model validated thoroughly with experimental observation is proven to predict the global behavior of biomass combustion accurately. In addition, a predictive kinetic model for PM reduction was developed using the Discrete Particle Model (DPM) in CFD analysis.
The time-resolved CFD model is also formulated in this study, together with more detailed devolatilization kinetics by the inclusion of different lignocellulosic components. The CFD analysis reveals that 99.3% of the soot is burnt in the combustion chamber. Local concentrations of soot precursors from lignin decomposition i.e., acetylene, and regions with a high temperature in the freeboard promote an increased rate of soot formation. Meanwhile, the residence time and oxygen availability become the most influential factors to minimize the soot emissions.
Stefan flow
particulate matter
biomass
combustion
soot
furnace
orthogonal collocation
CFD simulation
Författare
Maulana Nugraha
Chalmers, Kemi och kemiteknik, Kemiteknik
Particle modelling in biomass combustion using orthogonal collocation
Applied Energy,;Vol. 255(2019)
Artikel i vetenskaplig tidskrift
On the Sherwood number correction due to Stefan flow
Chemical Engineering Science,;Vol. 249(2022)
Artikel i vetenskaplig tidskrift
Particulate Matter Reduction in Residual Biomass Combustion
Energies,;Vol. 14(2021)
Artikel i vetenskaplig tidskrift
Analysis of Particulate Matter Emission in Biomass Combustion
The experimental furnace is successfully developed and equipped with on-line sensors to accurately monitor biomass combustion including PM emissions. Different combustion conditions, i.e., gas residence time, air temperature level and air/fuel ratio, are explored to examine the influence of these conditions on the emission level. CFD simulations are developed to predict the combustion behavior inside the biomass furnace. The validated CFD simulation using experimental results, provide better understanding of how PM is formed and reduced in the furnace. The availability of PM precursors (e.g., acetylene) and high temperature in the furnace promote high formation of PM, while oxygen level and residence time dictates the PM reduction. The important findings from the current work might inspire further works to develop better furnace design and/or operating conditions in order to reduce emissions from biomass combustion while maintaining high energy conversion.
Ämneskategorier
Naturresursteknik
Kemiteknik
Styrkeområden
Energi
ISBN
978-91-7905-723-7
Doktorsavhandlingar vid Chalmers tekniska högskola. Ny serie: 5189
Utgivare
Chalmers
Online
Opponent: Prof. Jacobo Porteiro, Department of Mechanical Engineering, University of Vigo, Spain.