Three-dimensional full-loop numerical simulation of coal and sludge co-combustion in a circulating fluidized bed

Artikel i vetenskaplig tidskrift, 2023

The Dense Discrete Phase Model (DDPM) method is used to simulate the co-combustion process of coal and sludge over the full-loop circulating fluidized bed in a three-dimensional (3D) Eulerian-Lagrangian framework. Both heterogeneous (fuel conversion through pyrolysis and char combustion) and homogeneous reactions (e.g. volatile combustion) are considered. Comparison of the predicted pressure profile, flue gas composition and bed temperature with measurements show good agreement and validate the DDPM methodology for accurate description of the gas–solid flow and combustion process over the full-loop circulating fluidized bed. The results of coal and sludge co-combustion are analysed qualitatively and quantitatively in terms of flow characteristics, gas composition, reaction rate profile, and particle combustion characteristics. Due to the lower density and higher volatile content of the sludge, as the coal-to-sludge feeding ratio decreases, the combustion reaction rate is gradually skewed upwards in the furnace, shifting up also the corresponding gas concentration profiles. For the given fuel sizes, the faster devolatilization rate of coal yields a shorter burnout time than that of the sludge particles. Our work provides an intuitive perspective to the fluidized bed community to boost comprehension on the coal and sludge co-combustion in a full-loop circulating fluidized bed.