Reducing electrical losses in buildings: a study of load-side dc/dc converter topologies for low-power appliances
Paper i proceeding, 2023

Electrical losses in buildings occur from power transfers in the cabling and voltage conversions. The latter is either from stepping up and down in voltage or switching between ac and dc. This work targets the load–side dc/dc converter for low–power residential appliances. Two dc/dc converter topologies are presented and compared with conventional products. The efficiency characteristics of the converters are measured in the laboratory and modelled for two applied cases: a single–family residential building and an office building. The annual losses per appliance and converter type are modelled for the two case studies based on measured power profiles from typical building appliances and the efficiency characteristics. The results highlight the necessity to account for the efficiency at partial converter loading and the increased performance from the suggested topologies designed in this work. Compared to the market reference, annual loss reductions of 24–76% are achieved from the converter designs in this work.

converter

measurements

simulations

DC

Författare

Patrik Ollas

RISE Research Institutes of Sweden

Torbjörn Thiringer

Chalmers, Elektroteknik, Elkraftteknik

Niclas Samuelsson

Plejd AB

Ahmed Marwan Mousa Sunjaq

Chalmers, Elektroteknik, Elkraftteknik

IEEE PES Innovative Smart Grid Technologies Conference Europe


979-8-3503-9678-2 (ISBN)

2023 IEEE PES ISGT Europe
Gronoble, France,

Energieffektiv energiomvandlingför elektriska laster i byggnader

Energimyndigheten (Projektnr49590-1), 2020-01-01 -- 2021-12-31.

Styrkeområden

Energi

Ämneskategorier

Annan elektroteknik och elektronik

DOI

10.1109/ISGTEUROPE56780.2023.10408048

Mer information

Senast uppdaterat

2024-03-04