On the mechanism and energetics of electrochemical alloy formation between mercury and platinum for mercury removal from aqueous solutions
Artikel i vetenskaplig tidskrift, 2024

Mercury pollution is an acute global concern threatening the health of humans and wildlife. Thus, there is a need for new and improved techniques to reduce emissions and remove toxic mercury from aqueous environments. Electrochemical alloy formation, specifically between mercury ions in aqueous solution and a platinum electrode, emerges as a promising solution. Through analysis of reaction mechanisms and energetics related to the formation and dissolution of the PtHg4 alloy, this study aims to deepen our understanding of the underlying processes of effective electrochemical mercury removal. Potentiodynamic measurements indicate rapid alloy formation at a clean platinum surface, proceeding with only trace amounts of metallic mercury on the surface. However, once the electrode surface has sufficient mercury coverage with an alloy thickness of around 1.5 nm, clear evidence of metallic mercury on the surface is observed. Furthermore, the amount of absorbed mercury on the cathode increases linearly in time. The onset potential for the alloy formation is experimentally determined using electrochemical quartz crystal microbalance with dissipation monitoring to be approximately 0.64 V vs. SHE, and the alloy dissolution (oxidation) onset potential is found to be approximately 0.98 V vs. SHE, at a mercury ion concentration of 10 mg/L. Density functional theory calculations are used to provide a theoretical value for the reversible potential from a thermodynamics perspective, yielding a value of 0.78 V vs. SHE at a mercury ion concentration of 10 mg/L. This value is in excellent agreement with the experimental results, suggesting an overpotential of about 0.14 and 0.20 V for the alloy formation and oxidation, respectively. These findings provide important information on the reaction mechanisms and overpotentials of the PtHg4 alloy formation and dissolution, which are key factors for development of large-scale mercury removal based on this technique, as well as fundamental understanding of the electrochemical alloy formation between mercury ions and platinum.

Mercury removal

EQCM

Platinum

DFT

Electrochemical alloy

Författare

Vera Roth

Chalmers, Fysik, Kemisk fysik

Mikael Valter

Chalmers, Fysik, Kemisk fysik

Linnéa Strandberg

Chalmers, Fysik, Kemisk fysik

Mohammad Reza Bilesan

Lappeenrannan-Lahden teknillinen yliopisto (LUT)

Julia Järlebark

Applied Chemistry

Chalmers, Kemi och kemiteknik, Tillämpad kemi

Jan Jamroz

Politechnika Warszawska

Chalmers, Fysik, Materialfysik

Björn Wickman

Chalmers, Fysik, Kemisk fysik

Electrochimica Acta

0013-4686 (ISSN)

Vol. 507 145137

Ämneskategorier

Oorganisk kemi

Materialkemi

Miljövetenskap

DOI

10.1016/j.electacta.2024.145137

Mer information

Senast uppdaterat

2024-10-15