Corrosivity of KOH(g) towards superheater materials in a simulated air reactor environment for chemical looping combustion of biomass

Artikel i vetenskaplig tidskrift, 2025

Chemical looping combustion (CLC) of biomass has the potential to improve the electrical efficiency in power plants that utilize carbon capture and storage (CCS). This is attributed to the mild corrosive environment anticipated in the air reactor (AR). However, previous studies have measured alkali emissions in the AR, likely in the form of KOH(g), suggesting that alkali may transfer from the fuel reactor (FR) to the AR. To investigate the corrosive effect of KOH(g) release in the AR, a novel experimental set-up was developed to simulate two scenarios for the AR 1) Clean scenario: no release of KOH(g) in the AR (5 % O2 + 3 % H2O + N2 bal.) and 2) Alkali slip scenario: continuous release of KOH(g) in the AR (5 % O2 + 3 % H2O + N2 bal. + 16 ppm KOH(g)). The exposure was carried out at 700 °C and six alloys, relevant as superheater material, ranging from stainless steels to nickel-base (Ni-base) alloys as well as a FeCrAl alloy were investigated. The samples were exposed for a total of 168 h and the morphology of the corrosion products was investigated using SEM-EDX and XRD. The presented results suggest that KOH(g) significantly accelerates the corrosion of the stainless steels and Ni-base alloys investigated, by rapidly destroying the protective Cr-rich oxide scale, resulting in the formation of a multilayer oxide scale with inferior protective properties. On the contrary, the FeCrAl alloy retained a protective Al-rich oxide scale irrespective of the presence of KOH(g). The findings in this study highlight that the release of KOH(g) in the AR during combustion of biomass in CLC could introduce corrosion challenges for installed superheaters that can be significantly mitigated by utilizing FeCrAl alloys.