Reducing plastic anisotropy through stress induced martensitic transformation in an additively manufactured metastable medium entropy alloy
Artikel i vetenskaplig tidskrift, 2025
Powder bed fusion laser beam (PBF-LB) is particularly effective for fabricating compositionally complex alloys such as high-entropy alloys (HEAs) or medium-entropy alloys (MEAs). Fabricating non-equiatomic metastable MEAs using PBF-LB can lead to the formation of unique microstructures that enhance the mechanical performance of these alloys. Nevertheless, plastic anisotropy in materials prepared by additive manufacturing routes including PBF-LB remains to be a technical challenge. This work presents the fabrication of a metastable non-equiatomic Co45Cr25(FeNi)30 MEA using PBF-LB. As-printed samples exhibited the formation of nano-scaled ε-martensite (HCP) phase along with the FCC phase. The HCP phase exhibited Shoji-Nishiyama orientation relationship with the FCC phase. High energy synchrotron X-ray diffraction (HEXRD) and electron backscatter diffraction (EBSD) in-situ tensile testing were employed to investigate the influence of the HCP phase on the alloy's deformation behavior. The presence of the HCP phase initiates stress-induced martensitic transformation well below the macroscopic yield strength. This transformation led to the non-linear stress and strain response for the FCC phase. Further straining resulted in significant load partitioning, with the HCP phase taking the majority of the load as it formed, significantly strain hardening the alloy and reducing the plastic anisotropy induced by texture in the as-printed material.
Load partitioning
Synchrotron X-ray diffraction
Powder bed fusion-laser beam
Medium entropy alloys
Phase transformation
Författare
Bala Malladi
Chalmers, Industri- och materialvetenskap, Material och tillverkning
T. Mishurova
Bundesanstalt für Materialforschung und -prüfung (BAM)
Vishnu Anilkumar
Chalmers, Industri- och materialvetenskap, Material och tillverkning
Bharat Mehta
Kungliga Tekniska Högskolan (KTH)
Chalmers, Industri- och materialvetenskap, Material och tillverkning
Alexander Evans
Bundesanstalt für Materialforschung und -prüfung (BAM)
Kumar Babu Surreddi
Luleå tekniska universitet
Malte Blankenburg
Deutsches Elektronen-Synchrotron (DESY)
Ulrich Lienert
Deutsches Elektronen-Synchrotron (DESY)
G. Bruno
Universität Potsdam
Bundesanstalt für Materialforschung und -prüfung (BAM)
Sheng Guo
Chalmers, Industri- och materialvetenskap, Material och tillverkning
Lars Nyborg
Chalmers, Industri- och materialvetenskap, Material och tillverkning
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing
0921-5093 (ISSN)
Vol. 933 148308Ämneskategorier (SSIF 2025)
Metallurgi och metalliska material
Bearbetnings-, yt- och fogningsteknik
Annan materialteknik
Styrkeområden
Produktion
Materialvetenskap
DOI
10.1016/j.msea.2025.148308