NiO particles with Ca and Mg based additives produced by spray-drying as oxygen carriers for chemical-looping combustion
Artikel i övrig tidskrift, 2008

Chemical-looping combustion is a two-step combustion process where CO2 is obtained in a separate stream, ready for compression and sequestration. The technique involves two interconnected fluidized bed reactors, with a solid oxygen carrier circulating between them. Results of reactivity experiments with 24 different oxygen carriers, based on NiO with NiAl2O4 and/or MgAl2O4 and produced with spray-drying, are presented. The investigation revealed that oxygen carriers supported by MgAl2O4, or where a small amount of MgO was added, displayed an increased fuel conversion when compared to oxygen carriers of NiO supported by NiAl2O4.

chemical-looping combustion

Författare

Erik Jerndal

Chalmers, Kemi- och bioteknik, Oorganisk miljökemi

Tobias Mattisson

Chalmers, Energi och miljö, Energiteknik

T Thijs

Vlaamse Instelling voor Technologisch Onderzoek (VITO)

Franz Snijkers

Vlaamse Instelling voor Technologisch Onderzoek (VITO)

Anders Lyngfelt

Chalmers, Energi och miljö, Energiteknik

Energy Procedia

1876-6102 (ISSN)

Vol. 1 1 479-486

Ämneskategorier

Energiteknik

DOI

10.1016/j.egypro.2009.01.064

Mer information

Senast uppdaterat

2018-06-11