Comparison of numerical and experimental results of the flow in the U9 Kaplan turbine model
Paper i proceeding, 2010

The present work compares simulations made using the OpenFOAM CFD code with experimental measurements of the flow in the U9 Kaplan turbine model. Comparisons of the velocity profiles in the spiral casing and in the draft tube are presented. The U9 Kaplan turbine prototype located in Porjus and its model, located in Älvkarleby, Sweden, have curved inlet pipes that lead the flow to the spiral casing. Nowadays, this curved pipe and its effect on the flow in the turbine is not taken into account when numerical simulations are performed at design stage. To study the impact of the inlet pipe curvature on the flow in the turbine, and to get a better overview of the flow of the whole system, measurements were made on the 1:3.1 model of the U9 turbine. Previously published measurements were taken at the inlet of the spiral casing and just before the guide vanes, using the laser Doppler anemometry (LDA) technique. In the draft tube, a number of velocity profiles were measured using the LDA techniques. The present work extends the experimental investigation with a horizontal section at the inlet of the draft tube. The experimental results are used to specify the inlet boundary condition for the numerical simulations in the draft tube, and to validate the computational results in both the spiral casing and the draft tube. The numerical simulations were realized using the standard k-e model and a block-structured hexahedral wall function mesh.

Measurements

water turbine

validation

OpenFOAM

spiral casing

draft tube

distributor

CFD

Författare

Olivier Petit

Chalmers, Tillämpad mekanik, Strömningslära

Berhanu Mulu

Håkan Nilsson

Chalmers, Tillämpad mekanik, Strömningslära

Michel Cervantes

25th IAHR Symposium on Hydraulic Machinery and Systems

Ämneskategorier

Strömningsmekanik och akustik

Mer information

Skapat

2017-10-08