Vehicle Dynamics Control after Impacts in Multiple-Event Accidents
Doktorsavhandling, 2013

Accidents statistics show that multiple-event accidents (MEAs) represent a considerable and increasing proportion of all vehicle traffic accidents. MEAs are characterized by having at least one vehicle subjected to more than one harmful event. MEAs now comprise approximately 25% of all passenger vehicle accidents. This thesis aims to make systematic progress towards developing a vehicle Post Impact Control (PIC) function so as to avoid or mitigate any secondary event in MEAs. To characterize the vehicle motion control problems for PIC, a number of MEAs from an accident database were analyzed. Post impact vehicle dynamics were studied considering the overall accident scenarios of exemplar cases. Reduction of kinetic energy and path lateral deviation were found to be most critical and beneficial for the vehicles after impacts. To understand the mechanism of influencing the post impact vehicle path, numerical optimization was applied to minimize the maximum path lateral deviation. It was found that effective control can be achieved across a wide range of kinematic conditions, by switching between three sub-strategies established at vehicle body level. Results also showed that active front-axle steering, in addition to individual-wheel braking, provides significant control benefits, although not for all post-impact kinematics. For closed-loop design of the path control, a Quasi-Linear Optimal Controller (QLOC) was proposed and verified with the numerical optimization results. The design method is novel – it well combines the linear co-states dynamics and nonlinear constraints due to tyre friction limits. The algorithm was further adapted to penalize both longitudinal and lateral path deviations, using a generalized cost function. To verify the function with driver interaction, a number of exploratory methods were investigated regarding the driver safety, as well as the capability and accuracy to reproduce the real-world post-impact vehicle kinematics. A scheme of the function design for real-time implementation was proposed and applied to the experiments in a driving simulator environment.

Virtual Development Laboratory, Hörsalsvägen 7A, Göteborg
Opponent: Ao.Univ.Prof. Dipl.-Ing. Dr.techn. Manfred Plöchl, Department of Mechanics and Mechatronics, Technische Universität Wien

Författare

Derong Yang

Chalmers, Tillämpad mekanik, Fordonsteknik och autonoma system

Quasi-linear Optimal Path Controller Applied to Post-Impact Vehicle Dynamics

IEEE Transactions on Intelligent Transportation Systems,; Vol. 13(2012)p. 1586-1598

Artikel i vetenskaplig tidskrift

Benefit Prediction of Passenger Car Post Impact Stability Control Based on Accident Statistics and Vehicle Dynamics Simulations

Proceedings of 21st IAVSD Symposium on Dynamics of Vehicles on Roads and Tracks, 2009,; (2009)

Övrigt konferensbidrag

Optimized brake-based control of path lateral deviation for mitigation of secondary collisions

Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering,; Vol. 225(2011)p. 1587-1604

Artikel i vetenskaplig tidskrift

A nonlinear post impact path controller based on optimised brake sequences

Vehicle System Dynamics,; Vol. 50(2012)p. 131-149

Artikel i vetenskaplig tidskrift

Ämneskategorier

Maskinteknik

Transportteknik och logistik

Matematisk analys

Styrkeområden

Transport

ISBN

978-91-7385-887-8

Doktorsavhandlingar vid Chalmers tekniska högskola. Ny serie

Virtual Development Laboratory, Hörsalsvägen 7A, Göteborg

Opponent: Ao.Univ.Prof. Dipl.-Ing. Dr.techn. Manfred Plöchl, Department of Mechanics and Mechatronics, Technische Universität Wien

Mer information

Senast uppdaterat

2018-04-13