3D Modelling of the bond behavior of naturally corroded reinforced concrete
Konferensbidrag (offentliggjort, men ej förlagsutgivet), 2015
Corrosion of steel reinforcement causes cracking and spalling of concrete cover which affects the bond; this is a crucial factor in deterioration of concrete structures. Earlier, anchorage tests have been carried out on specimens with naturally corroded reinforcements. In an ongoing study, the focus is given to the modelling of these
specimens. The aim is to evaluate the structural behaviour of the tested naturally corroded specimens. The analyses are performed in the FE program Diana. The frictional bond and corrosion models developed by Lundgren and Zandi are implemented in interface elements to model the interaction between the concrete and reinforcements. The preliminary results of the analysis showed differences in the shear crack pattern in comparison with the experiments. In the analysis, a longer remaining anchorage length was obtained in comparison with the experiment which resulted in a wrong failure mode. The issue might be related to the influence of aggregate interlock in FE analysis.