Varestraint weldability testing of cast ATI® 718Plus™—a comparison to cast Alloy 718
Artikel i vetenskaplig tidskrift, 2019

Varestraint testing of the newly developed cast ATI® 718Plus™ after pseudo-HIP (hot isostatic pressing) heat treatments showed that the extent of solidification cracking was independent of the heat treatment condition. The susceptibility towards heat-affected zone (HAZ) liquation cracking was found to be related to the heat treatment dwell time rather than the temperature. The heat treatments at 1120 and 1190 °C for 24 h were the most susceptible to cracking. On the other hand, heat treatments at 1120, 1160 and 1190 °C for 4-h dwell time exhibited the least amount of cracking. The solidification cracking was found to be similar whereas the HAZ liquation cracking was lower for ATI® 718Plus™ after the heat treatment at 1120 and 1190 °C for 4-h dwell time in comparison to cast Alloy 718.

Varestraint testing

Cast ATI® 718Plus™

Hot cracking

Backfilling

Cast alloy 718

Författare

Sukhdeep Singh

Chalmers, Industri- och materialvetenskap, Material och tillverkning

Joel Håkan Andersson

Chalmers, Industri- och materialvetenskap, Material och tillverkning

Welding in the World, Le Soudage Dans Le Monde

0043-2288 (ISSN) 18786669 (eISSN)

Vol. 63 2 389-399

Ämneskategorier

Teknisk mekanik

Bearbetnings-, yt- och fogningsteknik

Metallurgi och metalliska material

DOI

10.1007/s40194-018-0626-2

Mer information

Senast uppdaterat

2020-11-16