Exploration of Metal Composites and Carbon Nanotubes for Thermal Interfaces
Doktorsavhandling, 2020

Modern microelectronics are perpetually pushing against limitations caused by inadequate heat dissipation. One of the critical bottlenecks is at the interfaces between different materials and components. Thermal interface materials (TIM) are used to improve the heat transfer at these interfaces, and to improve TIMs is one of the critical research areas in order to reduce the total thermal resistance for electronics systems.

A TIM requires both high thermal conductivity, ability to conform to mating surfaces, and the ability to absorb stress from thermal expansion mismatch during thermal cycling. Solder based TIMs utilize solder to form a strong connection between the mating surfaces with high thermal conductivity, but their stiffness prevents adequate absorption of thermal expansion mismatch. In this thesis, the solder is combined with a fiber network phase, which modifies the mechanical properties, while maintaining the continuous heat paths within the solder. This solder matrix fiber network composite TIM allows for the tailoring of the mechanical properties of solder based TIM while retaining thermal performance.

Another promising TIM candidate is based on arrays of vertically aligned CNTs. CNT arrays can achieve good thermal performance, but the reliability had not previously been investigated experimentally. A thorough investigation of the reliability of CNT array TIM revealed that reliability is not guaranteed, but requires careful matching between CNT array height, bonding method and substrate configuration.

Furthermore, we developed a new joule self-heating chemical vapor deposition (CVD) method for the synthesis of double-sided CNT arrays on thin foils, which can be used both as TIM or as supercapacitor electrodes. Double-sided arrays are challenging with conventional CNT array synthesis methods, but the Joule heating CVD method allows for rapid, scalable and uniform synthesis of large area double-sided arrays. Finally, this method was used to study the effect of heat treatment of CNT arrays on graphite. The heat treatment serves to simultaneously improve the CNT crystallinity, eliminate catalyst residues, and form a seamless connection between CNT arrays and graphite.


Thermal interface materials

Carbon nanotubes

Kollektorn, MC2
Opponent: Samjid Mannan, PhD, King's College London, United Kingdom


Josef Hansson

Chalmers, Mikroteknologi och nanovetenskap, Elektronikmaterial

Novel nanostructured thermal interface materials: a review

International Materials Reviews,; Vol. 63(2018)p. 22-45


Fabrication and characterization of a carbon fiber solder composite thermal interface material

2017 IMAPS Nordic Conference on Microelectronics Packaging (NordPac),; (2017)p. 97-100

Paper i proceeding

Effect of Fiber Concentration on Mechanical and Thermal Properties of a Solder Matrix Fiber Composite Thermal Interface Material

IEEE Transactions on Components, Packaging and Manufacturing Technology,; Vol. 9(2019)p. 1045-1053

Artikel i vetenskaplig tidskrift

Synthesis of a Graphene Carbon Nanotube Hybrid Film by Joule Self-heating CVD for Thermal Applications

Proceedings - Electronic Components and Technology Conference,; (2018)

Paper i proceeding

Reliability investigation of a carbon nanotube array thermal interface material

Energies,; Vol. 12(2019)

Artikel i vetenskaplig tidskrift

Bipolar electrochemical capacitors using double-sided carbon nanotubes on graphite electrodes

Journal of Power Sources,; Vol. 451(2020)

Artikel i vetenskaplig tidskrift

Degradation of Carbon Nanotube Array Thermal Interface Materials through Thermal Aging: Effects of Bonding, Array Height, and Catalyst Oxidation

ACS Applied Materials & Interfaces,; Vol. 13(2021)p. 30992-31000

Artikel i vetenskaplig tidskrift

From the heat of a phone in your hand to the noise of an overburdened computer fan, most people are familiar with the effects of heat generation in electronics. This heat generation limits the performance improvements that our society has become used to, and for that reason improved thermal management is critically important for many applications. Within thermal management, thermal interfaces are one of the most significant bottlenecks. A thermal interface is the boundary between two surfaces in contact with each other, such as with a silicon chip and a heat sink, and since surfaces are never completely flat, the contact between the surfaces is limited, which severely restricts the heat flow.

Thermal interface materials (TIMs) are materials placed between these surfaces, and conform and fill out the gaps, allowing heat to flow better. A good TIM should have high thermal conductivity, conform well to the surfaces, and not break during the device lifetime. Within my research, I have been focused on achieving TIMs with these properties, based on two different concepts: metal composites and carbon nanotubes (CNTs).

Metals have generally high thermal conductivity, and by melting them, such as we do with solders, they can conform to surfaces very well but have high stiffness which can cause reliability issues. Part of this thesis describes our development a composite material consisting of polymer fibers in a metal matrix, combining the mechanical properties of polymers with the thermal properties of metals.

The other route is to utilize vertically aligned CNTs to bridge the interface. Carbon nanotubes have both high thermal conductivity and flexibility to conform to surfaces. In principle, these should also be soft enough for good reliability, but this had never been experimentally tested, until now. Our studies show that reliable CNT array TIM are possible, but only under certain conditions.

Thermal management is not the only application for CNTs, and during my research, I found that my work could have applications within more areas. Within this thesis, I have also utilized CNTs as supercapacitor electrodes, developed a new fabrication method and studied what happens to CNT arrays when they get really hot.  In total, this work represents an explanation of the possibilities of using both metal composites and carbon nanotubes for thermal interfaces, and beyond.





Den kondenserade materiens fysik





Doktorsavhandlingar vid Chalmers tekniska högskola. Ny serie: 4745



Kollektorn, MC2


Opponent: Samjid Mannan, PhD, King's College London, United Kingdom

Mer information

Senast uppdaterat