Tribological performance assessment of Al2O3-YSZ composite coatings deposited by hybrid powder-suspension plasma spraying
Artikel i vetenskaplig tidskrift, 2021

The advent of high-throughput plasma spray systems that allow axial feeding encourages the study of using liquid feedstock for various next-generation functional applications. The current study explores the benefit of such a plasma spray system to deposit hybrid powder-suspension Al2O3-YSZ ceramic matrix composite (CMC) coatings for tribological applications. The tribological performance of the hybrid processed CMC coatings was assessed using scratch, ball-on-plate wear and erosion tests and compared with that of monolithic powder-derived Al2O3 coatings. As-deposited and tribo-tested coatings were characterized using Scanning Electron Microscopy, X-ray Diffraction and Energy Dispersive Spectroscopy to analyse their microstructure and phase constitution. The results showed that the tribological performance of the hybrid powder-suspension Al2O3-YSZ CMC coating was significantly improved by enhancing the wear resistance under scratch, dry sliding ball-on-plate and erosion tests as compared to the conventional APS deposited monolithic Al2O3 coating. About 36% decrease in the dry sliding ball-on-plate specific wear rate and up to 50% decrease in the erosion wear rate was noted in the hybrid powder-suspension Al2O3-YSZ CMC coating as compared to the conventional APS deposited monolithic Al2O3 coating. The study concludes that the hybrid powder-suspension route can create CMC coatings with unique multi-length scale microstructures which can be attractive for combining different tribological attributes in the same coating system.

Tribology

Erosion

Scratch & wear

Axial plasma Spray

Hybrid

Powder

Suspension

Författare

Ashish Ganvir

Högskolan Väst

Sneha Goel

Högskolan Väst

Sivakumar Govindarajan

International Advanced Research Centre for Powder Metallurgy and New Materials, Hyderabad

Adwait Rajeev Jahagirdar

Högskolan Väst

Stefan Bjorklund

Högskolan Väst

Uta Klement

Chalmers, Industri- och materialvetenskap, Material och tillverkning

Shrikant Joshi

Högskolan Väst

Surface and Coatings Technology

0257-8972 (ISSN)

Vol. 409 126907

Drivkrafter

Hållbar utveckling

Ämneskategorier

Materialteknik

Metallurgi och metalliska material

Styrkeområden

Produktion

Materialvetenskap

DOI

10.1016/j.surfcoat.2021.126907

Mer information

Senast uppdaterat

2021-05-05